26.00€ 26.00

Quantity :          

Mote-PC USB interface board
Product Model: USB1000

Main Features

The USB1000 is an attachable interface board compatible with all the CMXX00 series of WSN Motes that include the terminal block connector. It provides connectivity to a PC or laptop through the USB connector.

  • Mote power (through powered USB connector)
  • Mote gateway connectivity (USB2UART Rx/Tx)
  • Mote reprogramming (acts as a programming downloader)

  ITEM Specification Description
  Interface Type USB type A USB 1.1 compatible. USB full speed support(12Mbps)
  USB2UART Chip FTDI® FT232BM USB2UART converter chip
  1kbit EEPROM Microchip® 93C46 Driver ID storage
  Quad Buffer Texas Instruments® SN74HC126 USB Rx/Tx Communications buffer
  Octal Switch Analog Devices® ADG715 Reset sequence recognition
  Mote Interface Terminal Block (ERNI® compatible) Connector to CMXX00 WSN Motes (Vcc, GND, 8 port ADC, 2 port GPIO pins)
Type Name Size Modification Date
Octal Switch Datasheet 177.71 KB 11/21/2015 11:08 AM.
EEPROM Datasheet 437.06 KB 11/21/2015 11:09 AM.
Quad Buffer Datasheet 690.00 KB 11/21/2015 11:12 AM.
USB2UART Chip Datasheet 1,046.14 KB 11/21/2015 11:17 AM.

Social Media

Back to Top