Shop

MTM-CM3300-MSP

MTM-CM3300-MSP

105.00€ 105.00

Quantity :          

802.15.4 Mote Module with additional power amplifier and LNA
Product Model: CM3300

Main Features

The CM3300 mote is a IEEE 802.15.4 compliant wireless sensor node based on the original open-source "TelosB" platform design developed and published by the University of California, Berkeley. The CM3300 presents a compact design in which the traditional USB connector has been replaced with an ERNI® connector compatible with Interface modules. The Hirose® 51-pin connector also adds versatility to this product as it is attachable to all the sensor boards family, and the SMA design greatly increases coverage area through the use of a more powerful 5dBi external antenna. It has an additional power amplifier and LNA in the radio chip to further increase transmission power. Due to this increased radio power, the CM3300 has a DC input as it is normally used as repeater or root node in normal network topologies, rather than with batteries.

  • IEEE 802.15.4 WSN platform
  • TI MSP430F1611 Microcontroller, CC2420 RF with additional power amplifier & LNA
  • TinyOS 2.x & ContikiOS Compatible
  • 2xAA Battery Holder
  • External 5dBi SMA antenna included
  • Hirose®51-pin connector
  • DC Input
  • Included DC Power Supply


  ITEM Specification Description
  Processor
  Processor Model Texas Instruments®
MSP430F1611
Texas Instruments®
MSP430 family
  Memory 48KB
10KB
1MB
Program flash
Data RAM
External Flash (ST® M25P80)
  ADC 12bit resolution 8 channels
  Interfaces UART, SPI, I2C
USB
Serial Interfaces
External System Interface (FTI® FT232BM)
  Radio
  RF Chip Texas Instruments®
CC2420
IEEE 802.15.4 2.4GHz Wireless Module
  Frequency Band 2.4GHz ~ 2.485GHz IEEE 802.15.4 compliant
  Sensitivity -95dBm typ Receive Sensitivity
  Transfer Rate 250Kbps IEEE 802.15.4 compliant
  RF Power -25dBm ~ 20dBm Software Configurable
  Range ~800m(outdoor), 80~120m(indoor) With standard 5dBi antenna
  Current Draw RX: 30mA TX: 120mA Sleep mode: 5mA Lower RF Power Modes reduce consumption
  RF Power Supply 2.1V ~ 3.6V CC2420 Input Power
  Antenna 5 dBi Dipole Antenna SMA connector
  RF Power Amplifier SIGE® PA2423L
  RF LNA Sirenza® SGL-0622Z SMA connector
  Electromechanical Characteristics
  Dimensions 84.40mm x 36.25mm x 13.30mm Including all connectors
  Weight 17.7g Without batteries
  Power 3V (2xAA Battery Holder Provided)
DC Power Input
MICREL® MIC5207 Power Regulator
DC power supply included
Type Name Size Modification Date
Microcontroller Manual 2,339.32 KB 11/21/2015 11:21 AM.
RF Transceiver Datasheet 883.75 KB 11/21/2015 11:11 AM.


Social Media

Newsletter

Back to Top