XM1000

From Advanticsys Tech Resources
Jump to: navigation, search
XM1000
Type: Mote

The XM1000 is the new generation of mote modules, based on "TelosB" technical specifications, with upgraded 116Kb-EEPROM and 8Kb-RAM and integrated Temperature, Humidity and Light sensors. The mote has the following general characteristics:

As with the original CM5000, this product is specially suitable not only as cots environmental wireless sensor node, but also as a very useful research platform for developers, as it includes in the same hardware module all the needed functionalities: sensor readings, processor power and wireless communication potential. The 116Kb-EEPROM and 8Kb-RAM makes it ideal for complex applications that require additional memory such as OTAP reprogramming or micro dpws implementation.

Warning: To avoid damage to this device, make sure to remove batteries before plugging it to the host computer's USB port.

Features

Item Specification Description
Processor
Processor Model TI MSP430F2618 Texas Instruments MSP430 family
Memory 116KB
8KB
1MB
Program flash
Data RAM
External Flash (ST® M25P80)
ADC 12bit resolution 8 channels
Interfaces UART, SPI, I2C
USB
Serial Interfaces
External System Interface (FTI® FT232BM)
Radio
RF Chip TI CC2420 IEEE 802.15.4 2.4GHz Wireless Module
Frequency Band 2.4GHz ~ 2.485GHz IEEE 802.15.4 compliant
Sensitivity -95dBm typ Receive Sensitivity
Transfer Rate 250Kbps IEEE 802.15.4 compliant
RF Power -25dBm ~ 0dBm Software Configurable
Range ~120m(outdoor), 20~30m(indoor) Longer ranges possible with optional SMA antenna attached
Current Draw RX: 18.8mA TX: 17.4mA Sleep mode: 1uA Lower RF Power Modes reduce consumption
RF Power Supply 2.1V ~ 3.6V CC2420 Input Power
Antenna Dipole Antenna / PCB Antenna Additional SMA connector available for extra antenna
Sensors
Light 1 Hamamatsu® S1087 Visible Range (560 nm peak sensitivity wavelength)
Light 2 Hamamatsu® S1087-01 Visible & Infrared Range (960 nm peak sensitivity wavelength)
Temperature & Humidity Sensirion® SHT11 Temperature Range: -40 ~ 123.8 ºC
Temperature Resolution: : ± 0.01(typical)
Temperature Accuracy: ± 0.4 ºC (typical)
Humidity Range: 0 ~ 100% RH
Humidity Resolution: 0.05 (typical)
Humidity Accuracy: ± 3 %RH (typical)
Electromechanical Characteristics
Dimensions 81.90mm x 32.50mm x 6.55mm Including USB connector
Weight 17.7g Without batteries
Power 3V (2xAA Battery Holder Provided) MICREL® MIC5207 Power Regulator

Expansion Connector

The XM1000 includes an expansion connector, that allows the access to a number of pins in the microcontroller.
Expcon.png

Resources